Administrator's Manual
8. Built-in Test Plan
Version 1.0.2
89
October 2009
8
Built-in Test Plan
The 310HD IP Phone provides a built-in test for verifying its operational integrity. These tests can
be performed before deployment and in cases of troubleshooting. These test are all performed in
one continuous sequence, where each test is followed by another consecutively, in the order
listed below:
Keypad and off-hook/on-hook test
LED test
Handset microphone (recording/speaking) and handset receiver (playing/listening) test
Headset microphone (recording/speaking) and headset headphone/receiver
(playing/listening) test
Speaker microphone (recording/speaking) and speaker receiver (playing/listening) test
MAC address and serial number verification
8.1
Test Preparation
Before you can start the built-in test, you need to cable the phone as follows:
1.
Connect the phone’s LAN port to a switch, using a LAN cable.
2.
Ensure that the DHCP server is functioning.
3.
Connect a headset to the phone.
4.
Power on the phone and wait until initialization is complete.
5.
From this stage onwards, follow the procedures described in the subsequent sections and in
consecutive order. In other words, continue with the procedure described in Section
8.2
on
page
90
.
Summary of Contents for 310HD series
