29
Warranty Information
Periodical check:
Sensitive measuring devices must be checked from time to time for accuracy
and leakage, we therefore recommend that the performance should be checked
every 2 years and after maintenance and repair.
Please contact the local distributor for details.
The unit satisfies the requirements of EN60601-1
：
Medical electrical
equipment Part 1: General requirements for basic safety and essential
performance; EN60601-1-2: Medical electrical equipment Part 1-2:General
requirements for basic safety and essential performance – Collateral standard:
Electromagnetic compatibility – Requirements and tests;
EN1060-1:Non-invasive sphygmomanometers – Part 1: General requirements;
EN1060-3: Non-invasive sphygmomanometers – Part 3: Supplementary
requirements for electro-mechanical blood pressure measuring system.
EN1060-4
：
Non-invasive sphygmomanometers – Part 4: Test procedures
to determine the overall system accuracy of automated non-invasive
sphygmomanometers.
Warning: Do not use luer lock connector in the construction of tubing. There
Is a possibility that they might be inadvertently connected to intravascular fluid
systems, allowing air to be pumped into a blood vessel.
30
Warranty Information
It can’t be used while the wrist (arm) has bleeding or wound to avoid the blood
flowing from the wound in pressurizing.
It can’t be used while the wrist (arm) has bleeding or wound to avoid the blood
flowing from the wound in pressurizing.
WARNING: No modification of this equipment is allowed.
Clean the cuff with a soft dry cloth.
Applied parts contains cuff.
The device
，
accessories and the packaging have to be disposed of waste
correctly at the end of the usage. Please follow Local Ordinances or
Regulations for disposal.
Protection Class: Internally powered equipment
Applied Part Type: Type B
Moisture Protection: IPX0, continue operation
Manufacturer will make available on request circuit diagrams, component
part lists etc for the service personnel in parts repair.
32
Guidance and manufacture’s declaration – electromagnetic emission
Emission test
RF emission
Harmonic
Voltage
Group 1
Class B
Not applicable
Not applicable
The Digital Blood Pressure Monitor use RF energy only for
its internal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
The Digital Blood Pressure Monitor is suitable for use in all
establishments other than domestic and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
CISPR 11
RF emissions
emissions
fluctuations/
flicker emissions
IEC 61000-3-3
IEC 61000-3-2
CISPR 11
Compliance
Electromagnetic environment – guidance
The Digital Blood Pressure Monitor is intended for use in the electromagnetic environment
specified below. The customer of the user of the Digital Blood Pressure Monitor should
assure that it is used in such an environment.
31
Warranty Information
Guidance and manufacture’s declaration
Caution: this machine should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this machine
should be observed to verify normal operation in the configuration in which it
will be used.
*MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding
EMC and needs to be installed and put into service according to the EMC
information provided in the ACCOMPANYING DOCUMENTS.
*Portable and mobile RF communications equipment can affect MEDICAL
ELECTRICAL EQUIPMENT.
* Do not use a mobile phone or other devices that emit electromagnetic fields,
near the unit. This may result in incorrect operation of the unit.
Caution: This unit has been thoroughly tested and inspected to assure proper
performance and operation!
WARNING:
The use of ACCESSORIES, transducers and cables other than those specified,
with the exception of transducers and cables sold by the MANUFACTURER of
the COMPRESSOR NEBULIZER as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY of
the ME EQUIPMENT or ME SYSTEM.
Warranty Information
