Adjusting Settings
10
Replace the battery cover.
Caution!
3
Battery Installation / Replacement
9
Use two identical 1.5V alkaline batteries type
AAA/LR03.
Do not use rechargeable batteries.
Replace both of the batteries if the symbol of
low battery appears on the display.
Never leave any low battery in the battery
compartment since they may leak and cause
damage to the unit.
Press the “MEM” down button about 10 seconds unil the units (kPa or
mmHg) displayed when the unit turned off.
Then press the “MEM” up button to change the current unit.
Press the “START/STOP” button to save the current setting and turn off.
11
Proper Way of Measurement
1
Wrap the cuff tightly
around your wrist by
using the Velcro strip.
2
Sit in a chair with your feet flat on the floor.
3
Remove all clothes from your
arm allowing the cuff to fit
directly on the skin.
Start to inflate
Deflating automatically
All symbols display
Measurement starts while inflating.
2
The hearbeat symbol “ ” flashes once a pulse is detected.
To a fit pressure
Continue Inflating
Heartbeat appear
Inflating
Start to inflate
All display symbols appear.
12
Take a Measurement
Press the “
START/STOP
” button.
1
1cm
(0.4'')
