nubeca BW2110 Instruction Manual Download Page 8

60 Sets Measurement Values

25

Specifications

BW2110

LCD Digital Display

Oscillometric Method

Measurable 

Model No.

Display

Measuring Principle

Circumference of Wrist

13.5~21.5cm (5.3''~8.5'')

Electric Shock Protection

Measurement

Range

Accuracy

Pressure

Pulse

Pressure

Pulse

Pressure

0 to 299 mmHg (0~39.9 kPa)

40 to180 Pulses/min

3 Digits Display of mmHg or kPa
3 Digits Display
Memory/IHB/Heartbeat/Low Battery,etc.

3 mmHg (0.4kPa)

5% of reading

Pulse

Internal power supply appliance type B

LCD

Indication

Symbol

26

Specifications

10 ~ 40  C (50 ~ 104  F)
15 ~ 90%RH (Noncondensing)

-20 ~ 60  C (-4 ~ 140  F)
10 ~ 95%RH (Noncondensing)

Temperature
Humidity

Temperature
Humidity

Barometric Pressure

Automatic by Internal Pump

Automatic by Air Valve

In 2 Minutes

Approx. 87*84*36mm

Operating

Environment

Memory Function

Inflation

Power Source

Rapid Air Release

Automatic Power-Off

Dimensions

Approx. 110g (Batteries not included)

Gross Weight

80~105 kPa

2 AAA  Alkaline Batteries

28

27

Warranty Information

Federal law restricts this device to sale by or on the order of a physician.

Unit subjected to misuse, abuse, and neglect of these manual contents,  

non-instructional purposes;unauthorized repair or modifications will be excluded 

from this warranty. This guarantee specifically excludes expendables and 

consumables, for example batteries.All warranty claims must be directed to the 

distributor responsible for the sale of the device. The content of this warranty is 

subject to change without further notice.

For repair under this warranty.Our authorized service agent must be advised of 

the fault within the period of the warranty.This warranty covers parts and labor 

only under normal operations.A transportation fee or freight fee that may be 

incurred will be the owner’s responsibility.Any defect resulting from natural 

causes, e.g.,flood,hurricane etc., is not within this guarantee.

This guarantee does not cover damage incurred by use of the unit not in 

accordance with the instructions, accidental damage, or being tampered with or 

serviced by unauthorized service agents. 

The unit, excluding the unit cuff, is guaranteed to be free of defects in 

workmanship and materials  for a period of two years from the date listed on the

purchase record, when used in accordance with the instructions provided with the

unit.The unit cuff is warranted to be free from defects in materials and 

workmanship appearing within one year from the date listed on the purchase 

record when the unit is used in accordance with the instructions provided with the

unit.

Statement

The intended use: The unit is intended to be used by adults at home or medical 
centre to measure blood pressure and pulse rate.
The unit satisfies the requirements of IEC60601-1 Medical electrical equipment, 
EN1060-1: Non-invasive sphygmomanometer, EN1060-3: Non-invasive 
sphygmomanometer,IEC80601-2-30: Medical electrical equipment.
The unit has passed the EMC Test.
Blood pressure measurements determined with this device are equivalent to 
those obtained by a trained observer using the cuff/stethoscope auscultatory 
method, within the limits prescribed by the American National Standard, 
Manual, electronic, or automated sphygmomanometers.
The risk of patient and user can be lowered to acceptable level.
Substitution of a cuff different from that supplied might result in measurement error.
Please contact us if you need the circuit diagrams, component part lists etc.
Specifications are subject to change without notice due to improvements in 
performance.

Transport and 

Storage

Environment

Summary of Contents for BW2110











Reviews: