13
Take a Measurement
Press the “
START/STOP
” button to turn off the unit.
4
The cuff is deflated automatically,
and the measurement results are
stored in memory with date and
time
The “ ” symbol will be displayed
if irregular heartbeat is deteced.
The blood pressure and pulse rate are displayed when the
measurement completed.
3
“kPa”display
“mmHg”display
“ ”display
“ ”display
The unit will automatically turn off after two
minutes if you have forgotten to turn it off.
NOTE:
To stop the inflation or measurement, press the
“START/STOP” button in anytime. The unit will
stop inflating and then release and turn off.
OR
OR
The unit also calculates an average reading based on the values of the
latest 3 times measurement taken.
Press the “MEM” up button, the average value of the latest 3 times
measurement taken of the current user will display with the average reading.
Use the Memory Function
14
To read the average value
...................................
the average value of the latest
3 times measurement taken
Turn to next
The unit stores the blood pressure and pulse rate in the memory after
completing a measurement every time. It can automatically store 60 sets of
measurement values . The oldest record is deleted to save the latest
measurement value when more than 60 sets.
15
Use the Memory Function
..............................................
To read the measurement value
Press the “MEM” up button to display the set of measurement values.
Press the “MEM” down button to display the next set of measurement values.
After the measurement finished and when reading the memory values,
the backlight is on about 10 seconds.
16
Use the Memory Function
To delete the memory value..............................................
In the memory reading mode, press the “MEM” down button for 4-6 seconds, the unit
will display “ ”
.
Press the “MEM” up button and confirm “ ” or “ ”.
If you are sure all the data of corresponding user can be deleted, press the
“START/STOP” button, all the corresponding user’s data will be deleted and
the unit will turn off.
Note: If you have set “ ”, but do not press a button for 2 minutes, the unit will
turn off automatically, but the corresponding user’s blood pressure data will not
be deleted. The delete operation must be confirmed by user.
The 1st latest
measurement value
The 2nd latest
measurement value
The 60th latest
measurement value
Backward
Forward
