NTT docomo MONO MO-01K, Instruction Manual

Page: 131 / 162

Appendix/Index
129
■ Mail
● Cannot receive email automatically
Check if Emergency mode is ON. → P.36
■ Camera
●
Still images and videos shot with the camera are blurred
･
Check if clouds, dirt or film attach to the lens of camera.
･ Auto shooting function is equipped to the camera of the
terminal, but you can also focus a camera using the touch
focus function.
●
Still image or video shot with flash is whitish
If there is your finger or cover around the camera lens, flash light
may reflect and affect still image or video shooting.
■
International roaming
● Cannot use the terminal overseas (when is displayed)
Do you subscribe WORLD WING? Check if you subscribe
WORLD WING.
●
Cannot use the terminal overseas (when is displayed)
･ Check if you are out of the international roaming service area
or in an area with poor signal strength. Check if the service
area and network operator are available or not, refer to NTT
DOCOMO website.
･ Change the network settings or overseas network operator
settings.
- Set [Preferred network type] to [4G/3G].
→ P.122
- Set [Network operators] to [Select automatically]. → P.121
･ Turning the power off and on may solve the problem.
→
P.33
●
Cannot perform data communication overseas
Turn on [Data roaming]. → P.121
● The terminal suddenly became unavailable while using
overseas
Check if usage amount exceeds the limit of maximum charges
for use. For use of "International roaming (WORLD WING)", the
limit of maximum charges for use is set in advance. If exceeding
the limit of maximum charges for use, pay the charges.
● Cannot receive calls overseas
Is [Incoming call restriction while roaming] set to [Activate
restriction]?
→ P.124
● No caller ID is notified/a notified caller ID is different from
that of the caller/functions for using contents saved in
phonebook or those using Caller ID notification do not
operate
Even if a caller notifies its caller ID, it is not displayed on the
terminal unless the network or network operator notifies it. And a
different caller ID may be notified depending on the network or
network operator you use.
■ Data management
●
Data transfer is not performed
Check if USB hub is used. If you use USB hub, operations may
not be performed correctly.
● Data saved in microSD card is not displayed
Remove and attach the microSD card. → P.30
●
Images cannot be viewed
If image data is broken, a gray screen or etc. may be
displayed.