Before Using the Terminal
28
Installing/Removing docomo nano UIM
card
・
Install/remove after turning off the power.
・
To remove the tray, use the included SIM ejector (sample).
Installing
1
Open the docomo nano UIM card/microSD card
slot cover
→
2
Insert the tip of SIM ejector into the hole for
removing the tray
・
Firmly insert it straight until the tray comes out. Failure to insert
it straight may cause malfunction or damage.
3
Draw the tray straight
4
With the IC side facing up, set the docomo
nano UIM card into the tray
・
Be sure to fit the docomo nano UIM card into the tray so that it
does not shift.
Notch
IC
Summary of Contents for MONO MO-01K
Page 1: ...INSTRUCTION MANUAL 17 10 ...