NTT docomo MONO MO-01K, Instruction Manual

Page: 22 / 162

Contents/Precautions
20
- If there are multiple wireless LAN access points nearby and the
same channel is used, search may not work correctly.
・
2.4GHz device cautions
The operating frequency band of the WLAN device is used by
industrial, scientific, consumer and medical equipment including
home electric appliances such as microwave ovens, premises radio
stations for identifying mobile units used in the manufacturing lines
of plants (radio stations requiring a license), specified low power
radio stations (radio stations requiring no license) and amateur
radio stations (radio stations requiring a license).
a
Before using the device, confirm that premises radio stations for
identifying mobile units, specified low power radio stations and
amateur radio stations are not being operated nearby.
b
If the device causes harmful radio interference to premises radio
stations for identifying mobile units, immediately change the
frequency band or stop use, and contact "General Inquiries" on
the last page for crosstalk avoidance, etc. (e.g. partition setup).
c
If the device causes radio interference to specified low power
radio stations or amateur radio stations, contact "General
Inquiries" on the last page.
Notes on the sample (SIM ejector)
・
Do not insert the SIM ejector into a hole, etc. other than the
docomo nano UIM card/microSD card tray slot.
Doing so may cause a malfunction or damage.
・
Make sure to use it without excessive force.
Doing so may cause a malfunction or damage.
・
For disposing, segregate and dispose of it according to your
local rule.
・
Do not use the SIM ejector for other mobile terminal.
Doing so may cause a malfunction or damage of the terminal.
Note
・
Never use a remodeled terminal. Using a remodeled terminal
violates the Radio Law/Telecommunications Business Act.
The terminal is compliant with rules on the technical standard
conformance of specified wireless equipment based on the Radio
Law/Telecommunications Business Act, and as a proof of it, the
"Technical Compliance Mark
" is depicted on the electronic
nameplate of the terminal. To check the electronic nameplate in the
terminal as follows.
From the Home screen, [Settings]
→ [About phone] → [E-label
certificate]
If you remove the screws and alter the inside of the terminal, the
technical regulations conformity certification becomes invalid.
Do not use the terminal with the certification invalid, as it is a
violation of the Radio Law and Telecommunications Business Act.
・
Be careful when using the terminal while driving.
Use of the terminal holding with your hand while driving will result in
a penalty.
However, absolutely necessary cases such as rescue of a sick
person or maintaining public safety are exempted.
・
Do not alter the basic software illegally.
It is regarded as the software modification and Repairs may be
refused.