Appendix/Index
130
■
Bluetooth function
●
The terminal cannot be connected to a Bluetooth
communication device/A Bluetooth communication
device cannot be found by search
Make Bluetooth communication device (commercial item)
registering stand-by state and then register the device on the
terminal. If you delete already registered device and register the
device again as a new device, delete the registrations on both
Bluetooth communication device (commercial item) and the
terminal and then perform registration of the devices.
●
Calls cannot be made from the terminal connecting to
external device such as car navigation or handsfree
device
If calls are made several times when the other party does not
answer or is out of service, the call to this number may be
disabled. In this case, turn terminal off and on.
■
External device connection
●
An external device connected using USB Cable A to B 01
(optional) is not recognized
Reconnect the external device. However, some devices may not
be detected.
■
Map/GPS
●
Cannot set AUTO-GPS service information
・
Check if the battery level is low and AUTO-GPS function stops.
If AUTO-GPS stops due to [Low-power operation settings],
AUTO-GPS service information cannot be set. In this case, set
[Low-power operation settings] to [Not suspend] or charge the
battery.
・
Check if [AUTO-GPS operation settings] is unmarked.
→
Error messages
●
Cellular network not available.
・
The terminal is out of service area, or the received signal is too
weak. Move to a location where radio signal can be reached.
・
The docomo nano UIM card is not working properly.
Removing and inserting docomo nano UIM card may solve the
problem. In this case, contact "Repairs (Inquiries/Request)" on
the last page of this manual (in Japanese only).
●
Restricted access changed
Appears when the voice service or data service is not received.
●
SIM card is locked
Enter your PIN code correctly.
→
●
SIM card is PUK-locked.
Enter your PUK (PIN Unlock Key) correctly.
●
Unusable SIM card
PIN lock disable code is locked. Please contact a docomo Shop.
●
Storage space running out
Available memory space in the terminal is low. If you continue to
use the terminal, some functions or applications may not work.
Activate the Settings screen and select unnecessary
applications, then tap [UNINSTALL] to delete the applications.
●
Storage is full/Not enough storage space/Please delete
some files and try again!
There is no memory space in the microSD card. Delete
unnecessary data to save the memory space.
Summary of Contents for MONO MO-01K
Page 1: ...INSTRUCTION MANUAL 17 10 ...