NTT docomo MONO MO-01K, Instruction Manual

Page: 38 / 162

Before Using the Terminal
36
Emergency mode
In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
1
Press and hold
O
(1 sec. or more)
2
[Emergency mode] → [OK]
The terminal restarts and Emergency mode is set.
･
To cancel the setting, perform the same operations again or
from the Home screen in Emergency mode, tap [Emergency
mode]
→ [OK].
◆
Information
･
Alternatively, from the Home screen, → [Disaster kit] → → Tap
[OK] to set Emergency mode.
Application permissions
The first time you launch an application or function that accesses
other functions and information on your terminal, a confirmation
screen that requests authorization for access rights appears. When
you approve these access rights, the corresponding functions and
information become available to the application/function.
･
Confirmation screens vary depending on the application or
function. Check the displayed content carefully and operate.
〈
Example
〉
When launching "File Manager" application for
the first time
1
From the Home screen, → [File Manager]
A confirmation screen appears.
2
[DENY]/[ALLOW]
After this step, follow the onscreen instructions.
◆
Information
･
If permission is not granted, some applications/functions may not
work, or use of the functions may be limited.
･
To change the permissions, from the Home screen, [Settings] →
[Apps] → Select an application → [Permissions] → Turn ON/OFF
permissions to change.