NTT docomo FOMA N2502 HIGH-SPEED, Connection Manual

Page: 70 / 100

20
Before Usi
ng the FOMA Termina
l
3 Click the task tray icon on the desktop
■
Windows Vista
■
Windows XP
■
Windows 2000
• If “FOMA N2502 HIGH-SPEED を安全に取り
外します ” (Safely Remove FOMA N2502
HIGH-SPEED), etc. appears, the FOMA
terminal is properly recognized.
• If no message appears even after a while, turn
off the PC, check the connection and try again.
Removing
Confirm that the communication line is disconnected.
1
Click the task tray icon → “FOMA
N2502 HIGH-SPEED
を安全に取り外しま
す
” (Safely Remove FOMA N2502
HIGH-SPEED), etc.
2 Confirm the message that the PC card
can be removed, then remove the
FOMA terminal from the PC
■
From CF card slot
■
From PC card slot
• Follow the PC’s User Guide instructions about
remove operation (e.g. by pressing the eject
button).
• The FOMA terminal’s metal part may be hot.
Hold around the antenna sides and remove
the FOMA terminal. Removal may be difficult
depending on the PC.
N
z
If the PC returned to hibernation/standby mode, etc.
with the FOMA terminal inserted, do not remove the
FOMA terminal.
z
To carry or not use the FOMA terminal, remove from
the PC and place in the Carrying case for FOMA
N2502 HIGH-SPEED.
z
Do not hold the exposed part firmly with the FOMA
terminal inserted in the PC. Doing so may cause
injury, malfunction or damage.
z
Be aware of battery life when using battery drive to run
the PC. The FOMA terminal performance will be
unstable with low battery.
N
z
Keep the removed FOMA terminal in the Carrying
case for FOMA N2502 HIGH-SPEED.
z
The removed and immediately reattached FOMA
terminal may not be properly recognized. Wait for
about 3 seconds to reattach. If not recognized, remove
and attach again.