NTT docomo FOMA N2502 HIGH-SPEED, Connection Manual

Page: 67 / 100

17
Before Usi
ng the FOMA Termina
l
■ PUK Code
PUK code is an 8-digit number to release PIN1 lock.
You cannot change the code.
Entering incorrect PUK 10 times in a row activates
FOMA card lock. Keep a separate record of the code.
• Releasing PIN Lock → “Manual for FOMA N2502
HIGH-SPEED”, p.42
FOMA Card (UIM) Function Difference
The following table shows the function difference
between blue FOMA card (UIM) and green/white
FOMA card (UIM):
*: This FOMA terminal cannot directly obtain User certificate
required for FirstPass. Insert your FOMA card (UIM) to
another FirstPass-compatible FOMA terminal, request
issuance of User certificate and download, then insert the
FOMA card (UIM) to this FOMA terminal. For details on
how to obtain User certificate, see Instruction Manual of
the FOMA terminal to be used.
Communications Available
from the FOMA Terminal
Packet Communication/64K Data
Communication
Packet Communication
FOMA-packet-communication-compatible access
points such as DoCoMo Internet connection service
“mopera U” enables data communication at up to
7.2 Mbps downlink and up to 384 kbps uplink (best-
effort).
• 7.2 Mbps max. or 384 kbps max. does not
represent the actual communication speed, but the
maximum value on the technical standards.
• The actual communication speed varies depending
on the communication environment or network
congestion.
• Communication speed varies depending on the
access point or signal quality.
• Use FOMA Byte Counter contained in the bundled
CD-ROM to check the approximate byte count or
usage charge via packet communications. (FOMA
Byte Counter is software only for PC, and
incompatible with PDA.)
• When using data communication (packet) on PDA,
the sending/receiving speed is a maximum of
384 kbps. Incompatible with HIGH-SPEED area
communications.
• The communication speed turns to 384 kbps for
both uplink and downlink when you are out of the
FOMA HIGH-SPEED service area, or even in the
service area you connect to the access point
including mopera to which the high-speed is not
supported.
N
z
PIN2 code cannot be changed on this FOMA terminal.
To change PIN2 code, insert your FOMA card (UIM) to
a FOMA terminal that can change PIN2 code. For
details on PIN2 code change, see Instruction Manual
of the FOMA terminal to be used.
Install the FOMA terminal to start FOMA N2502
HIGH-SPEED Utility, and the PIN1 code entry screen
appears.
Enter PIN1
Enter PUK
OK Three consecutive errors
OK Ten consecutive errors
FOMA N2502 HIGH-SPEED
utility and data communication
come into service.
New PIN1 configuration
available Contact your local
DoCoMo shop
Function
Blue FOMA Card
(UIM)
Green/White
FOMA Card (UIM)
FirstPass Unavailable Available
*