NTI VOPEX SERIES SPLITTER/EXTENDER
4
VOPEX INSTALLATION
Any or all of the 4 models of Remote Units listed on page 1 can be connected to the VOPEX and any time. The features
that are usable will depend on the models that are connected. For example, the DDC Update button will be effective for any
1000 foot Remote Units that are connected, but may not work on the 600 foot Remote Units (depending upon the features
available at the time of manufacture).
VOPEX-C5VA-xC1000
1.
Make connections between the VOPEX and the audio and video source(s). (See Fig. 1.)
a)
Connect the male15HD cable end of a VEXT-3 to the VGA connector on the back of the
video source.
b)
Connect the female 15HD cable end of the VEXT-3 cable to the 15HD male
connector marked "Video" on the VOPEX.
c)
Connect one 3.5mm stereo plug end of the SA-3-MM cable into the 3.5mm female audio
connector marked "line out", "spkr", or "headphones" on the audio source.
Notes:
If all 3 connectors are available, use the connector marked "line out".
The "line out" connector is typically lime green and may be marked with this symbol
The "spkr" connector is typically orange, and may be marked with this symbol
The "headphones" connector may be marked with this symbol
d)
Connect the other 3.5mm stereo plug end of the SA-3-MM cable into the 3.5mm female stereo
audio connector marked "Audio In" on the VOPEX.
Figure 1- Connecting a VOPEX to a CPU
