NTI UNIMUX MULTI-USER KVM SWITCH
15
No-Video Models
Some models of UNIMUX Hi Density USB KVM Switch have been specially designed without support for video. As
such, the OSD menu control described in this manual cannot be used. To control the No-Video version of this
product, use the following control methods described in the manual:
•
front panel control using touch-switches and LEDs (see page 17)
•
RS232 control (see page 38)
•
Telnet Interface- via command line interface (see page 44)
Note: Ethernet configuration cannot be changed using the OSD menu in the absence of video support.
Instead, to change network settings, use the NTI Discovery Tool provided on the CD (page 49). (Default
configuration settings can be found on page 31.)
Cables are available from NTI having only the 15HD high density connector at one end and USB Type A male
connector at the other end (HDUSB-x-MM where x = 3 or 6 feet).
Figure 13- Cable for USB-only support
