NTI UNIMUX MULTI-USER KVM SWITCH
3
MATERIALS
Materials Supplied:
•
NTI UNIMUX-nXm-UHD Multi-user USB KVM Switch
•
IEC Power cord- country specific
•
4-#10-32 x 3/4" pan head screws and #10-32 cage nuts (server cabinet mounting hardware)
•
CD with pdf file of this manual and RS232 control software
•
DB9 Female-to-RJ45 Female adapter
•
5 foot RJ45-to-RJ45 CAT5 patch cable
Materials Not Supplied, but REQUIRED
•
HDUSBVEXT-
xx
-MM cable for each CPU being connected to the switch (models with video support)
•
HDUSB-3-MM / HDUSB-6-MM cables (3 foot or 6 foot) for each CPU being connected to the switch (for models without video
support (“-NV”))
Where
:
xx
is the length of the cable in feet (3,6,10, or 15 feet available)
MM
indicates male-to-male connector
Required for models with Remote User support via CAT5:
•
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see
page 61 for proper EIA/TIA 568 B wiring method)
Note: Shielded CAT 5,5e, or 6 cable must be used to connect between the switch and Remote extender unit in order to
meet CE emission requirements.
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or 330-562-7070
or by visiting our website at
www.networktechinc.com
.
See page 61 for some of the
available cables
.
HD15 Male
High Density
USBType A Male
15HD-Male
USB Type A
Male
HDUSBVEXT-xx-MM
(3,6,10 and 15 foot cables available)
HD15 Male
Video
15HD-Male