NTI UNIMUX MULTI-USER KVM SWITCH
8
2. Connect the user devices to the USB type A female ports labeled with the USB symbol ( ) on the rear of the UNIMUX
switch (see Figure 4 ). Ensure that the monitors and related user devices are connected to ports from the same device port
group.
Note: If there are three (3) USB type A female ports present (models with touch screen support only), then the third USB
port is available for connection of a USB cable from a touch screen type monitor. The USB ports are not device specific,
so the mouse, keyboard, and USB cable from a touch screen type monitor (or other suppported device) can be
connected to any of the available USB ports present.
Note: If device cables are not long enough to reach the UNIMUX switch, they can be extended either 5 or 10 meters
using either 1 or 2 NTI USB2-AA-5M Active USB 5 Meter Extensions (see Figure 5)- purchased separately. Using USB-
C5-LC you can extend device cables up to 150 feet. Contact your NTI salesperson for more details by calling (800) 742-
8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.networktechinc.com.
Figure 4- Install user devices (mouse and keyboard)
Figure 5- Use USB2-AA-5M to extend a device, or a computer
USB KEYBOARD
USB TYPE A
MALE CONNECTOR
USB TYPE A
FEMALE CONNECTOR
TO UNIMUX
SWITCH
USB2-AA-5M
USB Keyboard
USB
Mouse
USB Type A
Male Connectors
USB Type A Male
USB Type A Female
Rear View of UNIMUX-4X8-UHD
RS232
CPU 1
CPU 2
CPU 5
CPU 6
CPU 7
CPU 8
CPU 3
CPU 4
USER 1
USER 2
USER 3
USER 4
AC INPUT
100-240VAC
10W
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
ETHERNET
