NTI SERIMUX SERIES CONSOLE SWITCH
17
–
Press [
+
] to select the current port as source in a port modem settings copy-paste process (except port 0).
–
Then, press [
*
] to paste the port settings.
–
Press [
Y
] to paste the selected port settings to the current port, [
A
] to paste to all ports, [
S
] to specify the
destination port, or press any other key to cancel.
Display modem settings for different port number
Press [
>
] (greater than symbol) to display the next port (next higher port index) modem settings, or press [
<
] (less than symbol) to
display the previous port modem settings.
Press [
Esc
] or [
Space
] to return to the "Port settings " menu.
Port data buffer
From the "Port settings" menu, press [
7
] to view the port data buffer. In this display the administrator can see the last 508
characters received and transmitted to/from any port. This way the administrator can verify that data was transferred properly
between ports.
Figure 13- Port data buffer
Press [
P
] to see the previous (older) 128-character page information; press [
N
] to see the next (newer) 128-character page
information.
Up to 508 received characters and 508 transmitted characters (4 pages) can be inspected, for each port.
Press [
>
] (greater than symbol) or [
<
] (less than symbol) to change the current port.
Press [
Esc
] or [Space] to return to the "Port settings " menu.
FYI: Only the "ROOT" administrator is able to access the port data buffer.
