NTI SERIMUX SERIES CONSOLE SWITCH
16
Copy Port Serial Settings
–
Press [
+
] to select the current port as source in a port settings copy-paste process (except port 0).
–
Then, press [
*
] to paste the port settings.
–
Press [
Y
] to paste the selected port settings to the current port, [
A
] to paste to all ports, [
S
] to specify the
destination port, or press any other key to cancel.
Display serial settings for different port number
Press [
>
] (greater than symbol) to display the next higher port serial settings, or press [
<
] (less than symbol) to display the
previous port serial settings.
Press [
Esc
] or [
Space
] to return to the "Port settings" menu.
Modem settings
From the "Port settings" menu, press [
6
] to display the "Modem settings" menu.
Remote connections are possible if modems are used, usually by the users. The remote modem may call in to a local modem
attached to a SERIMUX port. A minimum number of port modem settings can be adjusted in the SERIMUX to control the
connection (try the default values first; refer to the manual(s) for the modems otherwise).
Figure 12- Modem settings menu
The administrator can initialize a modem attached to a SERIMUX port, or disconnect the modem. To control the modem
connection from the "Modem settings" menu, the following functions are possible:
Function
Keystroke
Attach and initialize a modem
[1] - [A]
Disconnect a modem
[1] - [D]
Change the modem reset string
[2]
Change the initialization string
[3]
Change the hangup string
[4]
Enable hangup on "NO CARRIER"
[5]
Save the changes
[Enter]
Cancel the command
[Esc]
Reset to default values [0]-[Y]
FYI: If an old modem is attached to a SERIMUX port, it may
be necessary to enable the “Hang-up on “NO CARRIER”
message” option, in order to hang-up and disconnect the
attached modem when receiving this message. Press [5],
then [Y] to enable or any other key to disable this option.
Usually, this option should remain disabled.
