manualshive.com logo in svg

NTEK doortalk, Product Manual, Page: 58 / 71

Share
Download
NTEK doortalk Product Manual Download Page 58

57

Connecting other Devices

Because of the number of available electronic devices that can be 

integrated with the relay of DoorTalk, we have taken this content 

online. Please take time to visit 

nteksystems.com/pages/download

 

so you can see which devices can be used with DoorTalk.

NEX Phone App is the Normal SIP Client App that can be used as a 

Client Device for DoorTalk, 

Vivex Deskphone, DoorPad and Smart 

Entry.

 This application can be used for Video and Voice over IP calls.

Download the NEX Phone Application from the Play Store on your smart device

 Note: You may Choose from line 1-4

Nex Phone Application

1. Open the Application

2. Tap “More”

3. Tap “Settings”

4 .Tap “SIP”

5. Select a Line

6. Tap “Next”

Please Input the following details

•Display Name (Indicate the Name you 

want to appear in your Phone Book)

• Call ID (Kindly check autoprovision.

nexportals.com for the available 

extensions for your DoorTalk)

• IP Address (Enter the IP address 

you’re both connected)

• Default Password (000000)

• Port (Enter the default SIP Port: 5060)

• Swipe 3G/LTE if you want to use 

mobile data.

Note:

 Carrier charges for internet service 

may apply

• Tap “Save”

Figure 6.1

Figure 6.2

Confirmation:

 Green dot will display on the upper left part of the 

screen of your mobile device

Summary of Contents for doortalk








































































Reviews:

No comments