NTEK DOORPAD, Product Manual, Page: 22 / 44

21
Product Setup (SIP Server)
3. Tap “Yes” to proceed registering
the product
Note:
A pop up message will display
for Setup Guide will appear
Let’s register the DoorPad to NTEK SIP Cloud Server. This will allow the
product to use the full range of its features as a SIP Server.
1. Tap “Settings”
2. Tap “SIP Setting”
Note:
To check the connection, you may open the internet browser app and
connect to any website.
Reminders
Please note that the adapter’s power requirements are the following:
Output: 12V 2A Input: 100 - 250VAC 50-60 Hz
If you are connecting DoorPad as a client to an existing SIP Server,
kindly proceed to Product Configuration > Adding your Device as a
Client
AutoProvisioning
To make use of our AutoProvision Solution and easily set up your
DoorPad, kindly follow the next steps. If you wish to manually set SIP
configurations, please proceed to the Manual Set-up below.
Figure 8.1 Figure 8.2
Figure 8.3