8
National Rejectors, Inc. GmbH, Buxtehude
Teach Mode
By using the teach mode you can programme coins or token in
channel 10 and 11. In all versions of the G-13. validator the teach
mode is programmable. However, a combination of the 2-price-
totalizer with sales counter and the teach mode does not make sense
as the tasks of the switch for single coin inhibit for the 12th channel
would overlap each other.
Using the teach mode:
The validator remains connected in the vending machine.
•
On the rear of the validator two Dual-In-Line switches are
positioned. Switch no. 12 ON.
•
Depending on the intention to teach channel 10 or 11, please
switch ON the appropriate switch.
•
Insert coins or token.
After insertion of the 10th coin (token) the validator gives an
acoustic signal (click of the acceptance gate). The measured
values are now registered.
•
Turn switch no. 12 OFF.
•
Also turn appropriate switch for channel 10 or 11 OFF.
Once again the acceptance gate gives an acoustic signal (1 time),
i.e. the programming has been finished successfully.
G-13.6 Characteristic features of the system
1
2
3
4
5
6
7
8
9
10
11 12 13 14
ON
OFF
