20
National Rejectors, Inc. GmbH, Buxtehude
Cleaning
Only the coin validator's flight deck must be wiped clean from time to
time with damp cloth (luke warm water with some washing up liquid).
Over and above there is no further maintenance work to do.
Under no circumstances may the cloth be so wet that fluid
runs into the device. Other the PCB will be damaged.
Do not use any solvents or scouring agents which attack
the plastic of the device.
1. Pull the vending machine's mains plug.
2. Carefully open the flight deck 1 on the left-hand side and keep it
open (Fig. 8).
3. Wipe the coin runway inside the coin validator clean.
4. Close the flight deck again.
5. Reconnect the vending machine to the mains supply.
Fig. 8: Open the coin validator's flight deck
1
G-13.6 Appendix
