2-8
Installation and Setup
To connect an optical bypass switch:
1.
Make sure the pins on the switch cable connector are aligned with the
holes in the connector on the bridge.
2.
Plug the switch cable into the Optical Bypass connector on the bridge.
Connecting to a Redundant Power Supply
A redundant power supply (RPS), model RPS-600, provides backup power
for the bridge. Its connector is on the rear panel of the bridge.
Figure 14. Redundant Power Connections
The DC power consumption of the bridge is [email protected]. Before
connecting bridges to the RPS-600, you need to calculate the overall DC
power consumption carefully.