![background image](http://html1.mh-extra.com/html/npi/nulink-2000/nulink-2000_user-manual_1713865033.webp)
3-2
Console Program Essentials
port of the bridge. The management console used for the connection can
be a VT100 terminal or a PC running VT100 terminal emulation software.
Alternatively, the console program can be accessed through a remote
connection via Telnet. In this setup, a modem is connected to the console
(serial) port by an RS-232 cable. See Chapter 5 and Appendix A for
connection details.
To access the console program:
1.
Connect a terminal (or a PC with terminal emulation software) to the
console port using a null modem adapter and a serial cable.
2.
Set your terminal to the following settings:
♦
Baud—9600
♦
Parity—None
♦
Data Bits—8
♦
Stop Bit—1
3.
If your settings are correct, the title screen automatically displays at the
end of the boot sequence.
4.
When you press a key to continue, the Login screen appears.