![background image](http://html1.mh-extra.com/html/npi/nulink-2000/nulink-2000_user-manual_1713865061.webp)
5-2
Using Telnet
2.
If you have established a password at the bridge’s console, an access
verification screen may display asking you to enter a password.
3.
Enter the
password
if requested.
4.
After you make the Telnet connection, and enter the password if
requested, the NuLink 2000 title screen appears.
5.
When the NuLink 2000 title screen appears, you can now use the
console program as described in Chapters 3 and 4 and Appendixes B
and C.
If the Telnet connection is broken during a session, you can make a new
connection by repeating all required steps.
Limitations
When using Telnet, keep the following in mind:
♦
Only one active Telnet session at a time can access the bridge. (An
active session is one that has progressed past the access verification
screen.)
♦
A Telnet session and a console program session cannot be active
concurrently.
♦
If a connection is attempted while another session is active, the access
verification screen displays a message about only one connection
allowed.
♦
After 5 minutes of inactivity, a Telnet connection is automatically
broken.