![background image](http://html1.mh-extra.com/html/npi/nulink-2000/nulink-2000_user-manual_1713865022.webp)
1-10
Bridge Overview
LEDs
The following table explains bridge-level LED status indicators on the
front panel of the bridge.
Table 2. Bridge-Level LED Display Status
LED
Color
Indicates
Power
Green
Blinking Green
Internal power supply of bridge is active.
Internal power supply of bridge is inactive;
connected RPS is supplying power.
RPS
Green
Active RPS is connected to bridge.
SNMP
Green
Blinking green
SNMP agent is ready.
Bridge is receiving SNMP packet. After POST,
the POST failed.
Console
Green
Blinking green
RS-232 link is present.
After POST, the POST failed.
The following table explains port LED status indicators on the front panel
of the bridge.
Table 3. Port LED Display Status
LED
Color
Indicates
FDDI:
Off
Red
Steady amber
Flashing green
Green
FDDI is in Reset state.
Port has been disabled by SMT.
Port initialized and ready for connection.
Port is in standby mode.
Port has an active link to connected device.
10Base-T/100Base-TX:
10M/ACT
Green
Blinking green
10Base-T link is present.
Port is transmitting/receiving packets.
100M/ACT
Green
Blinking green
100Base-TX link is present.
Port is transmitting/receiving packets.
FDX/COL
Green
Amber
Full duplex mode is enabled.
Collision occurred in half duplex mode.