![background image](http://html1.mh-extra.com/html/npi/ba-01x/ba-01x_operating-instructions-manual_1713843019.webp)
BA-01X User Manual
_________________________________________________________________________________________________________________
___________________________________________________________________________
version 1.9
page 19
Figure 8: Schematic diagram of the passive cell model
6.2.
Connections and Operation
It is assumed that all connections are built as described in chapter 5.
Checking the configuration
o
Turn POWER switch of the amplifier off.
a) For simulation of an experiment using a suction electrode
o
Connect the BNC jack labeled 10M
Ω
of the cell model to the BNC connector P
EL
of the
headstage.
b) For simulation of an experiment using a sharp electrode
o
Connect the BNC jack labeled 50M
Ω
of the cell model to the BNC connector P
EL
at the
headstage. For headstages with SMB connector use the supplied SMB to BNC adapter.