NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
11
STARTING THE DEVICE
2.4. Connecting monitor
This product supports following interfaces for main monitor: HDMI, VGA.
For HDMI and VGA outputs following resolutions are supported: 800x600, 1024x768, 1280x1024,
1366x768, 1440x900, 1920x1080
After changing resolution you have to confirm it by clicking YES. In case of monitor does not display
anything please wait 8 seconds, then previous resolution will be restored.
Note:
You can use the HDMI <> DVI converter to connect to the DVI monitor.
HDMI cable and HDMI<>DVI converter it’s not included and you have to buy it separately.
2.5. Camera and Network wiring
NVR-5304 POE has 4 bulid-in RJ-45 ethernet ports with PoE support which can be used for
connecting cameras. By using Ethernet cables connect the cameras and NVR to the switch, like on
image below. Please notice that the Ethernet connection is effective within 100 meter distance.
Before adding any camera to the NVR, you have to configure its network settings like it is described
in Camera User Manual. For the next steps of camera and network configurations please check
chapter 3.4. Startup configuration.
Note:
To ensure recording stability from an overloaded network traffic, or unauthorised access, it is
strongly recommended to create separate network secured by router firewall from the user network.
INTERNET
PC COMPUTER
ETHERNET
SWITCH
NOVUS NVR
IP
Summary of Contents for NVR-5304POE
Page 1: ...user s manual NVR 5304POE...
