Novus NVR-5304POE, User Manual

Page: 28 / 62

NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
28
NVR CONFIGURATION

Time and date format - allows to select different time / date formats and enable visibility of it
remotely in camera, associated to the selected channel.

OSD Position: menu allows to select any position for the OSD remotely in associated camera.

Image settings: user can set the brightness, contrast, saturation and hue remotely in associated
camera.

Sensor: set up various parameters remotely in camera, associated to the selected channel.
Note:
Not every camera model and network protocol allow to change all camera settings remotely .
5.2.2. Video Parameters - setting of streams parameters for every channel.
After selecting CHANNEL and ENCODING STREAM following parameters are available:

Stream type: select between Video or Video&Audio.

Resolution: there is list of resolution available for current camera

Bitrate type: select between CBR(constant) and VBR(variable).

Bitrate: compression value for camera’s current stream

Frame Rate: select different value from the drop-down list, the default value is “Full Frame”.

Video Quality: select different image quality as needed (for VBR mode).

I Frame interval: set the amount of frames for each I Frame.
By using COPY TO button you can copy current settings to other required channel .
Note:
Not every camera model and network protocol allow to change all camera settings remotely.