NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
29
NVR CONFIGURATION
5.2.3. Schedule Recording
- setting of different types of record plan for each channel.
After selecting CHANNEL following parameters are available:
Enable Recording: Tick the checkbox will start recording.
All Day Recording: For using one type of recording tick the checkbox and select one of
following: schedule, motion, alarm, motion or alarm, motion and alarm. It will start all day
recording based of selection you have done.
For using many type of recordings uncheck the checkbox and draw at schedule areas like is needed. It
will start schedule recording based of current schedule. You can setup up to 8 separate time periods
for each day/camera.
Color schedule description.
Blue (Continuous) : The continuous recording is performed on the recording data.
Yellow (Motion) : The motion event recording is performed on the recording data.
Red (Alarm) : The alarm event recording is performed on the recording data.
Pink (Motion or Alarm) : If motion or alarm event occurs then recording is performed on the
recording data.
Azure (Motion & Alarm) :If motion and alarm event occurs in the same time then recording is
performed on the recording data.
Record Time: use it for advanced & precise schedule setting, by selecting days and typing times
manually.
Advanced: You can set the prerecord time and post record time.
By using COPY TO button you can copy current settings to other required channel
.
Summary of Contents for NVR-5304POE
Page 1: ...user s manual NVR 5304POE...
