NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
12
NVR OPERATING
2.6. Peripheral device connection
Connecting audio ports
Audio output signal normally are above 200mV 1kΩ. You can connect the low impedance earphone, or
power amplifier with the external speakers.
Connecting USB devices
NVR has 2 x USB 2.0 ports for external Flash memory, mouse connection and other USB compatible
devices. 2 USB ports (1x independent and 1x shared) are located at back panel and 1 USB port at front
panel.
Note:
Back panels bottom port is shared with port at front panel (it is the same port), so you cannot use both
ports at the same time.
3. NVR OPERATING
3.1. Front panel description
1.
LED
Shows power, recording, network connection or active alarm statuses.
2.
USB
USB 2.0 port for external Flash memory and mouse connection.
3.2. Controlling via USB mouse
It is possible to control NVR via an USB mouse connected to the USB port. Double-clicking on any
camera in 2x2, 3x3 display mode switches the display to full-screen mode. Subsequent double-click
returns to previous display mode. Move cursor to the top or click the right key of mouse to bring up
MAIN MENU and select START icon.
Certain positions allow to select them via mouse scroll. Depending on NVR operating mode, pressing
RMB displays a corresponding function menu.
1
2
Summary of Contents for NVR-5304POE
Page 1: ...user s manual NVR 5304POE...
