Novus NVR-5304POE, User Manual

Page: 36 / 62

NVR-
5304POE User’s manual ver.1.1
All rights reserved © AAT Holding sp. z o.o.
36
NVR CONFIGURATION

Server Name and Port: values are set automatically after selecting Server Type

User Name: requires entering the user’s name registered in the DDNS database.

Password requires entering the DDNS-registered password.

Domain requires entering hostname, that was registered in selected DDNS server.
Note:
Although the DVR supports dynamic IP addresses, it is advised that DDNS support should be
performed at the local router that DVR is connected to.
Prior configuration attempt please register the address in one of the DDNS servers supported by
the device - www.dyndns.org server is advised.
Prior to configuring the DDNS please contact the network administrator in order to obtain
proper network parameters that are entered in this menu.
5.3.3. NTP setting - configuration of network time synchronization

Enable NTP: Tick the checkbox will enable detection functionality.

Server Address: set up required NTP server address

NTP Port: set up required NTP server port (default is 123)

Update Frequency: input the time interval needed to be adjusted

Select Time Zone: choose the time zone valid for yours localization.

GMT: allow to Daylight Saving Time adjustment, select ADJUST to enable.