NVIP
-
2Q
-
4201/PIR/W Quick start guide
ver. 1.0
All rights reserved © AAT Holding S.A.
10
The camera can also be powered via an RJ45 network connector, using PoE (IEEE 802.3af)
technology. Please, use a network switch or an IEEE 802.3af compliant PoE power supply to power
the camera through the PoE.
2.3. Connection of alarm input/output
The camera has one alarm input and output. The alarm input is used to connect a device such as a
motion detector, button, reed switch or photocell. Violation of the input triggers the alarm and activate
the previously programmed action.
The alarm output enables connection of an external siren and implementation of automatic control
functions, such as switching on lighting.
Alarm input connection
Alarm output connection
I
Alarm input, configurable: NC or NO
G
Alarm input ground
C
Alarm output terminals, (relay, 12VDC / 24VAC
2A max.)
O
trigger contact
signaling device
maximum load 2A
signaling device power
supply
12VDC or 24VAC max.
Caution:
It is forbidden to use –
as the camera power source –
PoE equipment (adapters, etc.) not
compatible with IEEE 802.3af standard (items called
“
passive PoE power supply
”).
Damages
that results from the usage of improper power supply source are not covered by the warranty.
START
-
UP AND INITIAL CONFIGURATION
