NVIP
-
2Q
-
4201/PIR/W Quick start guide
ver. 1.0
All rights reserved © AAT Holding S.A.
14
After the code has been scanned correctly, an
information board will be displayed on the
screen.
If the green LED is flashing, touch the "The
green light is flashing" confirmation box.
In the next step, indicate the WiFi network in
which the camera will work and enter the
password for it. This data will be sent to the
camera so that it can connect to the WiFi
network.
If the network visible on the screen is correct,
confirm it by touching the "Next" field. The
application will try to connect to the camera
and send configuration data. If this fails, an
information window about the lack of
connection will be displayed, which should be
closed by touching the "Confirm" field.
Then the name and password of the temporary
WiFi access point created by the camera will be
displayed.
Then go to the network settings on your device,
select the network with the indicated name
from the list of available networks and connect
to it. After connecting to the camera network,
return to the RXCamView application and
confirm the connection by touching the
"Connected to the device WiFi" field. Another
screen will be displayed, on which we enter the
login data for the camera (default: root, pass).
START
-
UP AND INITIAL CONFIGURATION
