NVIP-2DN6020SD-2P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
23
ELECTRIC CONNECTORS AND ACCESORIES
•
Turn the camera on
•
Check the SD card by checking its capacity in the
STORAGE MANAGEMENT
tab
.
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
•
software (web browser level) resetting the camera settings
•
hardware (using reset) restores factory defaults.
6.1. Restoring software factory defaults
Factory software default restores default settings of the IP camera except network settings. The camera
re-starts then, taking about one minute to complete. Option to restore the factory default is described in
SETUP>FACTORY DEFAULT
tab.
6.2. Restoring hardware factory defaults in IP cameras
In order to restore factory defaults for the camera please follow the instructions:
•
press the
RESET
button and hold on for 10 seconds
•
release button
•
log on after approx. 1 minute using default IP address (http://192.168.1.200) and default user name
(root) and password (pass)
In the NVIP-2DN6020SD-2P camera
RESET
button is located as depicted above.
RESET
