NVIP-2DN6020SD-2P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
9
2. START-UP AND INITIAL IP CAMERA CONFIGURATION
2.1. Description of connectors and control tools
CAUTION!
The camera is 24 VAC supplied. Minimal required power output for the power supply unit
should be at least 50W.
Camera can also be PoE+ supplied. However with this supply type the camera heater is not active
and the camera operating temperature range is from 0 ° C to 40 ° C.
START-UP AND INITIAL CAMERA CONFIGURATION
1. Port Ethernet 100 Mb/s (RJ-45 connector)
2. 24 VAC Power socket
3. ’Reset’ button (reverts to factory defaults)
4. Alarm input/output connector
5. Audio input/output connector
6. MicroSD card slot
1
4
2
6
3
5
