NVIP-2DN6020SD-2P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
13
2.3. Starting the IP camera
To run NOVUS IP camera you have to connect 24 VAC power supply or Ethernet cable between
camera and network switch with PoE+ with parameters compatible with camera power supply
specification.
Initialization process takes about 30 seconds. You can then proceed to connect to the camera via web
browser.
The recommended way to start an IP camera and perform its configuration is a connection to the PC via
the network switch which is not connected to other devices.
To obtain further information about network configuration parameters (IP address, gateway, network
mask, etc.) please contact your network administrator.
•
Connection utilizing external power supply and network switch
•
Connection utilizing network switch with PoE+ support (heater inactive)
START-UP AND INITIAL CAMERA CONFIGURATION
IP Camera
Network transmission
Network
transmission
Network Switch
Computer
Computer
IP Camera
Power supply and
network transmission
Network
transmission
Network Switch
PoE+
