background image

NVDN-221V/IR, NVDN-201V/IR, NVDN-201D/IR 

- User’s manual ver. 1.0 

All rights reserved © AAT Holding Sp. z o.o. 

 

 

 

EMC (2004/108/EC) and LVD (2006/95/EC ) Directives 

 
 

CE Marking

 

 

Our  products  are  manufactured  to  comply  with  the  requirements  of  the  following  directives  and  national 
regulations implementing the directives:  

 

 

Electromagnetic compatibility EMC 2004/108/EC. 

 

Low  voltage  LVD  2006/95/EC  with  further  amendment.  The  Directive  applies  to  electrical 
equipment  designed  for  use  with  a  voltage  rating  of  between  50VAC  and  1000VAC  as  well  as 
75VDC and 1500VDC. 

 

 

WEEE Directive 2002/96/EC 

 
 

Information on Disposal for Users of Waste Electrical and Electronic Equipment 

 

 

This  appliance  is  marked  according  to  the  European  Directive  on  Waste  Electrical  and  Electronic  Equipment 
(2002/96/EC)  and  further  amendments.  By  ensuring  this  product  is  disposed  of  correctly,  you  will  help  to 
prevent  potential  negative  consequences  for  the  environment  and  human  health,  which  could  otherwise  be 
caused by inappropriate waste handling of this product. 

The symbol on the product, or the documents accompanying the product, indicates that this appliance may not be 
treated as household waste. It shall be handed over to the applicable collection point for used up electrical and 
electronic equipment for recycling purpose. For more information about recycling of this product, please contact 
your local authorities, your household waste disposal service or the shop where you purchased the product. 

 
 
 

RoHS Directive 2002/95/EC 

 

Out of concern for human health protection and friendly environment, we assure that our products 
falling  under  RoHS  Directive  regulations,  regarding  the  restriction  of  the  use  of  hazardous 
substances  in  electrical  and  electronic  equipment,  have  been  designed  and  manufactured  in 
compliance  with  the  above  mentioned  regulations.  Simultaneously,  we  claim  that  our  products 
have  been  tested  and  do  not  contain  hazardous  substances  whose  exceeding  limits  could  have 

negative impact on human health or natural environment. 
 

 

Information 

 
The device, as a part of professional CCTV system used for surveillance and control, is not designed for self 
installation in households by individuals without technical knowledge. 
 
The  manufacturer  is  not  responsible  for  defects  and  damages  that  result  from  improper  or  inconsistent  with 
user’s manual installation of the device in the system. 

INFORMATION 

Summary of Contents for NVDN-201D/IR











Reviews: