background image

NVDN-221V/IR, NVDN-201V/IR, NVDN-201D/IR 

- User’s manual ver. 1.0 

All rights reserved © AAT Holding Sp. z o.o. 

 

 

 

WARNING! 

THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A 
PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE 
YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER 
DEVICE OPERATION.

 

WARNING! 

USER  IS  NOT  ALLOWED  TO  DISASSEMBLE  THE  CASING  AS  THERE  ARE  NO      
USER-SERVICEABLE  PARTS  INSIDE  THIS  UNIT.  ONLY  AUTHORIZED  SERVICE 
PERSONNEL MAY OPEN THE UNIT  

INSTALLATION  AND  SERVICING  SHOULD  ONLY  BE  DONE  BY  QUALIFIED  SERVICE 
PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS 

WARNING! 

PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN 
PRODUCT IN USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE 
PRODUCT, OR IF IT DOES NOT ARISE FROM THE USUAL APPLICATION OF THE 
PRODUCT,  MANUFACTURER MUST BE CONTACTED UNDER THE RIGOR OF 
EXCLUDING THE MANUFACTURER’S  RESPONSIBILITY FOR THE RESULTS OF SUCH AN 
ACTION. 

IMPORTANT SAFEGUARDS AND WARNINGS 

 

1. 

Prior  to  undertaking  any  action  please  consult  the  following  manual  and  read  all  the  safety  and 
operating instructions before starting the device. 

2. 

Please keep this manual for the lifespan of the device in case referring to the contents of this manual 
is necessary; 

3. 

All  the  safety  precautions  referred  to  in  this  manual  should  be  strictly  followed,  as  they  have  a 
direct influence on user’s safety and durability and reliability of the device; 

4. 

All  actions conducted by  the servicemen and users must be accomplished in  accordance with  the 
user’s manual; 

5. 

The device should be disconnected from power sources during maintenance procedures; 

6. 

Usage  of  additional  devices  and  components  neither  provided  nor  recommended  by  the  producer    
is forbidden; 

7. 

Mounting  the  device  in  places  where  proper  ventilation  cannot  be  provided  (e.  g.  closed  lockers 
etc.)  is  not  recommended  since  it  may  lead  to  heat  build-up  and  damaging  the  device  itself               
as a consequence; 

8. 

Mounting  the  camera  on  unstable  surface  or  using  not  recommended  mounts  is  forbidden. 
Improperly  mounted  camera  may  cause  a  fatal  accident  or  may  be  seriously  damaged  itself.  The 
camera must be mounted by qualified personnel with proper authorization, in accordance with this 
user’s manual; 

SAFETY REQUIREMENTS 

Summary of Contents for NVDN-201D/IR











Reviews: