NVDN-221V/IR, NVDN-201V/IR, NVDN-201D/IR
- User’s manual ver. 1.0
All rights reserved © AAT Holding Sp. z o.o.
8
3.2 Layout of important camera items:
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before mounting .
Put base of the camera, as a mounting template, to the wall or ceiling and mark drill holes.
Drill holes using markings.
Drill additional hole for video and power cables.
Put video and power cables through a hole in the base of the camera.
Using mounting screws from the package attach the base of camera to the ceiling/wall.
Put video and power cables through a previously drilled hole in the wall/ceiling.
Put dome cover on the camera and gently screw the stopping ring onto the base of the camera.
Manually point the camera in a desired direction to obtain a desired scene view.
Screw the stopping ring firmly (holding the camera with hand if needed) (NVDN-221V/IR and NVDN-201V/IR).
Attach the stopping ring tabs to the base of the camera. (
NVDN-201D/IR).
Secure the base-ring joint by counter-screw (NVDN-221V/IR and NVDN-201V/IR).
In NVDN-221V/IR camera please adjust zoom and focus if needed using adjustment screws. It is recommended to
check focus settings in infrared illumination and make correction in color mode to have proper focus in both
modes.
INSTALLATION
IR LED
Illumination sensor
Horizontal/vertical rotation
Focus adjustment
IR LED
Zoom adjustment
Illumination sensor
Horizontal/vertical
rotation
NVDN-221V/IR
NVDN-201V/IR and NVDN-201D/IR
