NVC-
DN6118SD/IR User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
20
CAMERA OSD MENU
7.1.2. PATTERN submenu
Pattern is a sequence of an existing functions (pan, turn, zoom, etc.), that may be called via keyboard or
used in tours. Camera allows for saving 6 patterns. Maximum length is 2 minutes per pattern.
NUMBER-
selects the pattern number for editing or run.
PROGRAM
- run the programming the pattern. Press OPEN to start saving the joystick
movement. CLOSE to save .
RUN
- starts the selected pattern.
DELETE
- deletes the selected pattern from camera memory.
NAME
-
allows to create the particular names for each pattern f.e. „CORRIDOR1”, „ROOM2”.
They are displayed on the screen during the pattern.
NAME DISPLAY ON/OFF
- turn on/off the name displaying on the screen.
7.1.3. TOUR submenu
Allows to set up Tours, i.e. lists of consecutively executed surveillance functions (presets, patterns, and
scans, up to 16 functions per tour). During tour, camera stops at presets for a defined period of time,
while scans/patterns are repeated certain amount of times.
Pattern
1 Number
1
2 Program
3 Run
4 Delete
5 Name _______________
6 Name Display
ON/OFF
Press CLOSE to Exit
Tour
1 Number
1
2 Program
3 Run
4 Delete
Press CLOSE to Exit
http://www.e-camere.ro/camere-supraveghere/Novus/NVC-DN6118SD-IR