NVAHD-2DN5220MSD/IRH-2 User’s manual ver.1.2
All rights reserved © AAT Holding S.A.
20
2. Video Parameter
Stream
- Stream ID (choose one from available streams)
Bite Rate Type
- Information about bit rate type
Bit Rate (kbps)
- Information about bit rate
I Frame Interval
- Information about I frame interval
Quality
- Information about quality
USE TIME STAMP - Video buffer (increases delay when enabled, maximum delay is 5s)
NOTICE:
USE TIME STAMP
function will not be available when using Flash instead of ActiveX.
3. PTZ Control Panel
PTZ Configure:
Preset
- Programming, deleting, and recalling presets
Track
- Programming, deleting, and recalling tracks
Speed
- Setting speed of movement
3D Position
- Turns on/off control using the mouse
North
- Setting orientation of the camera
Timer
- Setting schedules
PTZ Control:
Arrow keys
- Controlling the movement of the camera: up/down, right/left
„
Home
”
key
- Function unavailable
Zoom
- Zoom control
Focus
- Focus control
Iris
- Function unavailable
Brush
- Function unavailable
On/Off IR
-
Function unavailable
4. Menu bar
Change Password
- Change users password
NOTICE: Default password "pass" can be restored only after restoring default settings of the camera)
Sign Out
- Log out from camera
5. Video Control
Camera
- Default number of the camera is 1.
Video
- Turn on/off video
Audio
- Turn on/off audio
Interphone
- Turn on/off Interphone
NOTICE:
Audio and Interphone
functions will not be available when using Flash instead of Activex.
SETTINGS
4.9
ADJUST
submenu
Allows to perform additional image adjustments. By the ENTER command the following submenu will
appear:
SHARPNESS
- turns off (
OFF
) and activates (
AUTO
) the image focus correction. After selecting
AUTO
and giving the
ENTER
command, another submenu appears in which set the degree of correction and
the gain ranges for which the correction can be performed.
MONITOR
- adjusts the image parameters depending on whether it is to be displayed on the LCD
monitor or CRT. By the ENTER command, a submenu appears in which make precise adjustments.
LSC
- activates and deactivates the vignetting effect correction function
VIDEO OUT
- switches the system in which the camera works (
PAL
or
NTSC
)
WARNING! if the standard has been changed to CVBS or CVI, further control with DVR via
COAX protocol will not be possible, in this case RS-485 BUS has to be used.
