NVAHD-2DN5220MSD/IRH-2 User’s manual ver.1.2
All rights reserved © AAT Holding S.A.
12
2. Video Parameter
Stream
- Stream ID (choose one from available streams)
Bite Rate Type
- Information about bit rate type
Bit Rate (kbps)
- Information about bit rate
I Frame Interval
- Information about I frame interval
Quality
- Information about quality
USE TIME STAMP - Video buffer (increases delay when enabled, maximum delay is 5s)
NOTICE:
USE TIME STAMP
function will not be available when using Flash instead of ActiveX.
3. PTZ Control Panel
PTZ Configure:
Preset
- Programming, deleting, and recalling presets
Track
- Programming, deleting, and recalling tracks
Speed
- Setting speed of movement
3D Position
- Turns on/off control using the mouse
North
- Setting orientation of the camera
Timer
- Setting schedules
PTZ Control:
Arrow keys
- Controlling the movement of the camera: up/down, right/left
„
Home
”
key
- Function unavailable
Zoom
- Zoom control
Focus
- Focus control
Iris
- Function unavailable
Brush
- Function unavailable
On/Off IR
-
Function unavailable
4. Menu bar
Change Password
- Change users password
NOTICE: Default password "pass" can be restored only after restoring default settings of the camera)
Sign Out
- Log out from camera
5. Video Control
Camera
- Default number of the camera is 1.
Video
- Turn on/off video
Audio
- Turn on/off audio
Interphone
- Turn on/off Interphone
NOTICE:
Audio and Interphone
functions will not be available when using Flash instead of Activex.
SETTINGS
3.1.
MAIN MENU
By calling the 95 preset, the following menu will be displayed on the screen:
3.1.1
SYSTEM
Submenu
The submenu contains the basic system settings of the camera
DOME INFO
- basic information about the camera (serial number, software version, protocol, camera
ID, baud rate)
ID SETTINGS
- allows to set the camera ID and baud rate
(more info on page 21)
CLOCK SETTING
- allows to set the date and time of the system of the camera
AUTO RUN
- allows to set the activation of selected camera actions (presets, patrols, observation routes)
just after starting the camera and/or after a certain period of inactivity
DEFAULTS
- allows you to restore the camera's factory settings
VIDEO OUTPUT
- allows to set the camera's operating mode (AHD 1080, CVBS, CVI 1080, TVI 1080)
and set the color system (PAL, NTSC)
WARNING!
if the standard has been changed to CVBS or CVI, further control with DVR via COAX protocol
will not be possible, in this case RS-485 BUS has to be used.
PASSWORD
- allows to set the password for access to the camera menu and special (function) presets
