NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
67
BACKUP PLAYBACK
13.5 CD backup playback
When CD with copied records is inserted to PC CD drive,
FilePlay
tab should be selected
.
File opening icon
should be clicked and required file should be selected.
After a while, depending on data quantity, required file will be analyzed and prepared for playback.
Playback should be run following steps described in chapter 13.2.
13.6 CD backup converting to JPEG or AVI file format
Converting procedure is similar to procedure regarding flash memory, which is described in chapter
11.3.
13.7 CD backup printing
Printing procedure is identical as procedure regarding flash memory, which is described in chapter 13.4
13.8 Playback from HDD withdrawn directly from multiplexer.
NC Viewer
software
allows for HDD review and PC data backup.
In order to conduct this process, multiplexer should be turned off, swappable bay should be opened and
withdrawn. HDD should be connected to PC directly via IDE channels or using USB port. Than
NC Viewer
can be activated
.
CAUTION: before HDD connection (or disconnection) directly to IDE channel PC must be turned off
NOTICE: if necessary HDD operation mode should be configured using HDD jumpers. Do not forget
to restore settings before HDD connection to multiplexer.
In order to initiate playback from multiplexer's HDD,
ScanDisk
tab should be selected in
NC Viewer
program. From displayed
Phyical Disk
menu, HDD consisting of required records should be selected.
Each HDD capacity is displayed next to HDD title. HDD title, which name starts from
IDE 0
refers to
PC system HDD. HDD connected via USB port is defined as
USB Device
.
During records playback, icons-buttons and speed controller, similar to described in chapter 13.2,
should be used.
Information concerning HDD current sector , whereof records are played, is displayed during records
playback
