NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
19
in order to activate sequence mode on spot monitor
SPOT SWITCHING
position should be set
to
ON
.
When sequence mode is active, display time can be settled individually for each camera in seconds
( 1 to99). If camera is set to
OFF
image from this camera automatically will not be displayed in
sequence mode.
CAUTION: camera image, which is displayed in sequence mode on spot monitor, can be a bit
brightened on main monitor. Therefore it is recommended to turn off sequence mode when the spot
monitor is unused.
When motion detection and alarm inputs are active automatic sequence mode is aborted for the event
duration. in his time only alarm camera will be displayed. Displaying time depends on alarm settings.
If
SPOT SWITCHING
position is set to
ON
, the last selected or last alarm camera from main monitor
will be displayed on spot monitor (when motion detection or alarm inputs are active)
(6)
TIME DISPLAY
if this option is set to
ON
time/date information will be
displayed on the main screen;
(9)
SYSTEM SELECT
This option is used to select TV system standard.
PAL
or
NTSC
system can be selected.
DEVICE MENU
▪ SPOT SWITCHING ON
▪ CAM01
02SEC
▪ CAM09
02SEC
▪ CAM02
02SEC
▪ CAM10
02SEC
▪ CAM03
02SEC
▪ CAM11
02SEC
▪ CAM04
02SEC
▪ CAM12
02SEC
▪ CAM05
02SEC
▪ CAM13
02SEC
▪ CAM06
02SEC
▪ CAM14
02SEC
▪ CAM07
02SEC
▪ CAM15
02SEC
▪ CAM08
02SEC
▪ CAM16
02SEC
▪ EXIT
SPOT SETUP
ENTER -SET
MENU EXIT