NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
14
DEVICE POWER UP
2.5 Device turn on and turn off.
Before turning on the device please make sure that the power supply (voltage and frequency)
conforms to device requirements. Also make sure that the power switch is set to „0”, HDD swappable
bay is locked with the key and that the all external devices are connected properly.
WARNING: We do not advice to connect any additional devices (such us cameras, monitors,
etc..) while device operation.
Device power on is activated by switching the power switch to position „1”.
The loading procedure of the operating system takes about 30 seconds.
During this procedure various information will appear on the screen.
During this procedure please do not press any buttons on the front panel of this device.
The loading procedure is finished when camera images will appear on the Main monitor along with
their descriptions and the system time.
To power off the device stop the recording and shut down the device using power switch.