NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD ver. 1.1 - user's manual
All rights reserved © NOVUS Security Sp. z o.o.
34
5. RECORDING
NV-DVR1104/CD, NV-DVR1108/CD and NV-DVR1116/CD multiplexers allow for manual
(activated by orange
REC
button) and schedule recording. In all recording modes only channels with
active recording function are recorded (see chapter 4,2)
Current recording status can be monitored by observing descriptions displayed on the screen and LEDs
on device’s front panel.
If there is no description displayed on the screen
ENTER
button should be pressed till required screen
mode appears.
▪
If
REC
inscription is displayed in red color, it means that at the given moment recording is
progressed with recording speed which value is displayed in upper right corner. Recorded
cameras descriptions are displayed in red color. Additionally red LED lights above
REC
button
and yellow H.D.D. LED blinks. In case of event, alarm camera description turns into yellow
color.
▪
Yellow
|A|
inscription, means that device operates in alarm recording mode. In case of event all
descriptions will turn into described above. In stand-by mode LED above
REC
button and
H.D.D. LED do not light. Recording speed which is displayed in stand-by mode does not refer to
alarm recording. It is continuous recording speed, which can be activated manual, by pressing
REC button. This option allows to activate recording even if recording was not activated
automatically . In order to return to stand-by mode REC button should be pressed.
▪
Yellow
|X|
inscription in left corner, means that device does not record. In this mode LEDs do
not light. Cameras inscriptions are displayed in white color (yellow color in case of event).
Recording speed which is displayed in stand-by mode does not refer to alarm recording. It is
continuous recording speed, which can be activated manual by pressing
REC
button. This option
allows to activate recording even if recording was not activated automatically . In order to return
to stand-by mode
REC
button should be pressed. When device does not record, alarm functions
operate in incomplete range; it means that alarm relay and audio signal can be activated even if
camera images are not recorded.
RECORDING
