RDC.ED.UT-3M-EMA.000 OM
Operating manual
EMA Thickness Gauge NOVOTEST UT-3M-EMA
Page. 16
Figure 2.12 – “PUT ON THE SAMPLE”
The device will make a measurement and display the thickness of the reference sample. If the
measured value is different from the reference sample and error is more than
(0.01h + 0.05) mm, the
device must be re-calibrated.
2.3.3 “SETTINGS” mode
When “SETTINGS” mode is selected (fig. 2.13), the device will go to the settings of the next
parameters:
“LANGUAGE”: setting the language of the device menu (English and Russian are
available);
“BRIGHTNESS”: change of the display brightness (10%, 20% … 100%);
“COLOR SCHEME”: selectin of the color scheme (01, 02);
“SOUND”: Turning on/off (“ON”, “OFF”);
“TYPE F.”: “Median” filter, “OFF”;
“CLEAR. SD”: Clearing of SD card (switching “OFF” to “ON”), the SD card level is
shown on the bottom part of the display;
“TRANSDUCER”: the selection of the stored transducers;
“MATERIAL”: aluminum, duralumin Д16Т, bronze, tungsten, iron, gold, brass, ЛС-59-1
brass, magnesium, manganese, copper, molybdenum, nickel, tin, lead, silver, steel
20ГСНДМ, ХН77ЕЮР steel, 40ХНМА steel, ХН70ВМТЮ steel, ХН35ВТ steel,
Х15Н15ГС steel, СТ3 steel, chromium, zinc, cast iron, 40х13 steel, user;
“SCALE”: measurement units (mm, μm);
“TIME”: time setting (24h);
“DATE”: setting the date, month, and year DATE/MONTH/YEAR.
Figure 2.13 – “SETTINGS” mode
