RDC.ED.UT-3M-EMA.000 OM
Operating manual
EMA Thickness Gauge NOVOTEST UT-3M-EMA
Page. 18
2.3.6 Measurement
Before using the device, make sure that the battery is charged sufficiently. The green battery icon
confirms that the battery is charged by 100%. If there is no charge or the charge is low (the red icon),
the battery must be charged by a charger or by connecting the device to a PC.
1.
Connect the EMA transducer to the device.
2.
Turn the device on by pressing “
”.
3.
Select the operating mode of the thickness gauge by pressing “
”, and set the needed
parameters.
4.
In needed, calibrate the device according to. 2.3.2.5.
5.
Put EMA transducer on the teste object and achieve a stable value on the display (fig.
2.16).
Figure 2.16 – Measurement
6.
To save the measurement value, press “
”. Then, the name of measurement can be set
with a virtual keyboard (fig. 2.17).
Figure 2.17 – The input of the measurement
Use “
”, “
”, “
” and “
” to navigate through the keyboard, select the needed
symbol by pressing “
”.
7.
To turn the device off, enter the main menu and press “
”.
