RDC.ED.UT-3M-EMA.000 OM
Operating manual
EMA Thickness Gauge NOVOTEST UT-3M-EMA
Page. 8
1.8 Means of measurement, device, and accessories
The operability of the device is estimated using the reference samples. The measurement error of
the device must be within the permissible error. If the permissible error is exceeded, the device must
be calibrated according to c. 2.3.2.5.
Adjustment and setting of the device must be done by NOVOTEST.
1.9 Marking
The front panel of the device must show the designation of the device and the trademark of
NOVOTEST.
The serial number is located on the back of the device.
1.10 Packaging
The processing unit and transducer are supplied in the packaging container excluding the damage
when transporting.
To avoid mechanical damage of the cable and sockets of the device, disconnect the transducer
from the device before placing it into the container.
